Difference between revisions of "Form 2"

From Asmbly Wiki
Line 1: Line 1:
 
barfloogle
 
barfloogle
{{DISPLAYTITLE:<div style="width:90%; background-color:lightblue">{{PAGENAME}}</div>}}
+
{{DISPLAYTITLE:<span style="width:90%; background-color:lightblue">{{PAGENAME}}</span>}}
 
Asmbly has two Formlabs Form 2 desktop SLA printers: one hosted, and one owned by Asmbly.  We also have Form Wash and Form Cure post-processing equipment.  Only resin purchased from Asmbly may be used in these printers.
 
Asmbly has two Formlabs Form 2 desktop SLA printers: one hosted, and one owned by Asmbly.  We also have Form Wash and Form Cure post-processing equipment.  Only resin purchased from Asmbly may be used in these printers.
  

Revision as of 00:15, 26 August 2023

barfloogle

Asmbly has two Formlabs Form 2 desktop SLA printers: one hosted, and one owned by Asmbly. We also have Form Wash and Form Cure post-processing equipment. Only resin purchased from Asmbly may be used in these printers.


ClassWarningIcon.png Members must complete the Intro to Resin 3D Printing Class before using this tool



$ There is an extra charge to use this tool $



Form2.jpg


FormPost.jpg


Maintenance

After a failed print, it may be helpful to print a few layers of this "cleaning mesh", then remove it, to pull off residue from the previous job. Formlabs has a help page for this for the Form3 printer, but the official mesh doesn't seem to be available.

File:Form2-cleaning-mesh-hex.stl

Resources


Maintenance

This tool is owned by James Manley and hosted at Asmbly for members to use. Please contact the workshop committee if maintenance is required.


Maintenance

This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.