Intro to the Wood Lathe Class

From Asmbly Wiki

There are 2 class options for gaining access to the woodturning area: "Wood Lathe: Make a Spindle" or "Wood Lathe: Make a Bowl". Both classes cover safety, basics of using the lathes, and all standard tools that you'll use on the lathe. Each class is just focussed on a different end product.

Concepts Covered in "Wood Lathe: Make a Spindle"

  • Parts of the Lathe
  • Lathe Safety
  • Lathe Tools - Gouges, Scrapers, Carbide, and Parting Tools
  • Sharpening Concepts: Roughing Gouges, Bowl/Spindle Gouges, and Scrapers
  • Mounting and Securing Turned Pieces (Optimized for Spindle Turning)
  • Spindle Turning
  • Sanding
  • Finishing
  • Parting

Concepts Covered in "Wood Lathe: Make a Bowl"

  • Parts of the Lathe
  • Lathe Safety
  • Lathe Tools - Gouges, Scrapers, Carbide, and Parting Tools
  • Sharpening Concepts: Roughing Gouges, Bowl/Spindle Gouges, and Scrapers
  • Mounting and Securing Turned Pieces (Optimized for Bowl Turning)
  • Bowl Turning
  • Sanding
  • Finishing
  • Parting

Please note: Attendees must wear comfortable, closed toe shoes and wear clothing that you do not mind getting covered in wood shavings. Loose clothing with strings or long jewelery is not recommended. If you have long hair it must be tied back. A face shield will be provided but please bring eye protection. A dust mask is optional but not provided.


This is an active class at Asmbly. If you can't find an upcoming session in the Class Schedule, email education@asmbly.org for more information.


Retrieved from "https://wiki.asmbly.org/index.php?title=Intro_to_the_Wood_Lathe_Class&oldid=3330"