Difference between revisions of "Laguna TFlux 5 Dust Collector"

From Asmbly Wiki
 
(One intermediate revision by the same user not shown)
Line 9: Line 9:
 
== Resources ==
 
== Resources ==
 
* [[Media:Tflux5 manual.pdf|Users Manual]]
 
* [[Media:Tflux5 manual.pdf|Users Manual]]
* [[Media:IVacPro_UserGuide_finalpress-10421-0200-2022.pdf|iVac Pro Switch User Manual]]
+
* [[Media:IVacPro_UserGuide_finalpress-10421-0200-2022.pdf|iVac Pro System Guide]]
* [[Media:IVacProToolPlus-User-Guide-2022.pdf|iVac Pro Tool User Manual]]
+
* [[Media:IVacProToolPlus-User-Guide-2022.pdf|iVac Pro Tool Plus User Manual]]
 
* [[Media:IVacProBlastGate-User-Guide-2022.pdf|iVac Blast Gate User Manual]]
 
* [[Media:IVacProBlastGate-User-Guide-2022.pdf|iVac Blast Gate User Manual]]
 +
* [[Media:IVac-Instruction-Sheet-E.F-26mar2013-10227-040W-IVAC-SWITCH.pdf|iVac Switch Instruction Sheet]]
 
Below is a table of the currently set dip switch configurations for all tools and blast gates. '''Changes to the Tool Address switch must be performed with the "Mode" switch in the OFF Position.''' '''<u>Changes to the Tool Address switch with the "Mode" switch in AUTO or ON will be ignored.</u>'''
 
Below is a table of the currently set dip switch configurations for all tools and blast gates. '''Changes to the Tool Address switch must be performed with the "Mode" switch in the OFF Position.''' '''<u>Changes to the Tool Address switch with the "Mode" switch in AUTO or ON will be ignored.</u>'''
 
{| class="wikitable"
 
{| class="wikitable"

Latest revision as of 20:28, 27 March 2024

Woodshop dust control is handled by a Laguna T|Flux:5 cyclone dust collector. Blast gates on all tools are automatic but we're still working on automatic stop/start; for now, users must manually turn on the dust collector before using a woodworking tool.

Note that the filter self-cleaning feature makes somewhat alarming noises. Flapping/crackling when the motor starts up and shuts down, and periodically during operation, is normal as the actuator bangs the pleats of the cartridge filter.

When emptying the dust bin, also check and empty the pan below the filter cartridge if sawdust is visible in the viewing window.


Tflux5.jpg


Resources

Below is a table of the currently set dip switch configurations for all tools and blast gates. Changes to the Tool Address switch must be performed with the "Mode" switch in the OFF Position. Changes to the Tool Address switch with the "Mode" switch in AUTO or ON will be ignored.

iVac Tool Pro/Blast Gate ID Codes
Machine ID Code Individual Power or USB Hub System Address
West Bend Edge Belt Sander 010010 B
Powermatic Combo Belt/Disc Sander 000001 A
Bosch Miter Saw 000010 A
Laguna Jointer 000011 A
Table Saws (both share gate) 000100 A
Powermatic Planer 000101 A
Router Table 000110 A
Supermax Drum Sander 000111 A
Grizzly G0569 Bandsaw 010000 B
Powermatic Large Belt Sander 010001 B
Grizzly G0817 - A01 Blast Gate D
Grizzly G0817 (1) 110010 Individual D
Grizzly G0817 (2) 110100 Individual D

Maintenance

This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.