Difference between revisions of "Lulzbot TAZ"
From Asmbly Wiki
| Line 7: | Line 7: | ||
{{Infobox 3d printer | {{Infobox 3d printer | ||
| Printer Name = Unknown Name (TAZ 2.1) | | Printer Name = Unknown Name (TAZ 2.1) | ||
| − | | Status = | + | | Status = {{PrinterActive}} |
| Manufacturer = Lulzbot | | Manufacturer = Lulzbot | ||
| Model = TAZ 2.1 | | Model = TAZ 2.1 | ||
Revision as of 17:55, 1 October 2022
Members must complete the Filament 3D Printing Class before using this tool
The Lulzbot TAZ 2.1 is a large dual-extruder 3D printer. It lives in the printer cabinet.
| Status | Active |
| Manufacturer | Lulzbot |
| Model | TAZ 2.1 |
| Nozzle Size | 0.4mm |
| Nozzle Type | Brass(?) |
| Nozzle Count | 2 |
| Filament Size | 1.75mm |
| Print Volume | 298(?) x 280(?) x 250(?)mm |
| Max Bed Temperature | 100(?)C |
| Max Nozzle Temperature | 290(?)C |
| Max Print Speed | 100(?)mm/s |
| Extruder Type | Direct |
| Manual | Unknown |
| Control Interface | Unknown |
| Network Address | Unknown |
Resources
Maintenance
This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.
