Difference between revisions of "Lulzbot TAZ"
From Asmbly Wiki
| Line 2: | Line 2: | ||
{{ToolPhoto|Lulzbot_TAZ.jpg}} | {{ToolPhoto|Lulzbot_TAZ.jpg}} | ||
| − | The Lulzbot TAZ | + | The Lulzbot TAZ 5 is a large dual-extruder 3D printer. It lives in the printer cabinet. |
{{Infobox 3d printer | {{Infobox 3d printer | ||
| − | | Printer Name = Unknown Name (TAZ | + | | Printer Name = Unknown Name (TAZ 5) |
| Status = {{PrinterActive}} | | Status = {{PrinterActive}} | ||
| Manufacturer = Lulzbot | | Manufacturer = Lulzbot | ||
| − | | Model = TAZ | + | | Model = TAZ 5 |
| Network Address = Unknown | | Network Address = Unknown | ||
| − | | Nozzle Size (mm) = 0. | + | | Nozzle Size (mm) = 0.5 |
| Nozzle Type = Brass(?) | | Nozzle Type = Brass(?) | ||
| Nozzle Count = 2 | | Nozzle Count = 2 | ||
| − | | Filament Size (mm) = | + | | Filament Size (mm) = 3mm |
| Print Volume (mm) = 298(?) x 280(?) x 250(?) | | Print Volume (mm) = 298(?) x 280(?) x 250(?) | ||
| Max Bed Temperature (C) = 100(?) | | Max Bed Temperature (C) = 100(?) | ||
Revision as of 00:37, 13 October 2022
Members must complete the Filament 3D Printing Class before using this tool
The Lulzbot TAZ 5 is a large dual-extruder 3D printer. It lives in the printer cabinet.
| Status | Active |
| Manufacturer | Lulzbot |
| Model | TAZ 5 |
| Nozzle Size | 0.5mm |
| Nozzle Type | Brass(?) |
| Nozzle Count | 2 |
| Filament Size | 3mmmm |
| Print Volume | 298(?) x 280(?) x 250(?)mm |
| Max Bed Temperature | 100(?)C |
| Max Nozzle Temperature | 290(?)C |
| Max Print Speed | 100(?)mm/s |
| Extruder Type | Direct |
| Manual | Unknown |
| Control Interface | Unknown |
| Network Address | Unknown |
Resources
Maintenance
This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.
