Lulzbot TAZ

From Asmbly Wiki
Revision as of 17:55, 1 October 2022 by Pearlgreymusic (talk | contribs)

ClassWarningIcon.png Members must complete the Filament 3D Printing Class before using this tool



Lulzbot TAZ.jpg


The Lulzbot TAZ 2.1 is a large dual-extruder 3D printer. It lives in the printer cabinet.


Unknown Name (TAZ 2.1)
Status Active
Manufacturer Lulzbot
Model TAZ 2.1
Nozzle Size 0.4mm
Nozzle Type Brass(?)
Nozzle Count 2
Filament Size 1.75mm
Print Volume 298(?) x 280(?) x 250(?)mm
Max Bed Temperature 100(?)C
Max Nozzle Temperature 290(?)C
Max Print Speed 100(?)mm/s
Extruder Type Direct
Manual Unknown
Control Interface Unknown
Network Address Unknown



Resources


Maintenance

This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.