Lulzbot TAZ
From Asmbly Wiki
Revision as of 00:39, 13 October 2022 by Pearlgreymusic (talk | contribs)
Members must complete the Filament 3D Printing Class before using this tool
The Lulzbot TAZ 5 is a large dual-extruder 3D printer. It lives in the printer cabinet.
| Status | Active |
| Manufacturer | Lulzbot |
| Model | TAZ 5 |
| Nozzle Size | 0.5mm |
| Nozzle Type | Brass(?) |
| Nozzle Count | 2 |
| Filament Size | 3mmmm |
| Print Volume | 298(?) x 280(?) x 250(?)mm |
| Max Bed Temperature | 100(?)C |
| Max Nozzle Temperature | 290(?)C |
| Max Print Speed | 100(?)mm/s |
| Extruder Type | Direct |
| Manual | Unknown |
| Control Interface | Unknown |
| Network Address | http://192.168.0.175:5003 |
Resources
Maintenance
This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.
