Powermatic 2820EVS Drill Press

From Asmbly Wiki
Revision as of 21:47, 6 August 2022 by Mgmoore (talk | contribs) (Added a link to a new pdf describing a new process for aligning the crosshair lasers.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Asmbly has recently acquired a Powermatic 2820EVS variable-speed drill press for the woodshop. This machine is for use with wood only - no metal, no coolant, and definitely no cutting oil!


ClassWarningIcon.png Members must complete the Woodshop Safety Class before using this tool



  • 1hp motor
  • 20" swing
  • 6" spindle travel
  • 5/8" keyed chuck
  • low range 150-870rpm
  • high range 600-3600rpm
  • Change Speed Range Only With Machine Off!


PM2820EVS.jpg


Resources


Maintenance

This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.