Difference between revisions of "Prusa MK3S+"

From Asmbly Wiki
Line 14: Line 14:
 
| Model = i3 MK3S+
 
| Model = i3 MK3S+
 
| Network Address = http://192.168.0.175:5001
 
| Network Address = http://192.168.0.175:5001
| WebInterace = Octoprint
+
| WebInterface = Octoprint
 
| Nozzle Size (mm) = 0.4
 
| Nozzle Size (mm) = 0.4
 
| Nozzle Type = Hardened Steel
 
| Nozzle Type = Hardened Steel
Line 32: Line 32:
 
| Model = i3 MK3S+
 
| Model = i3 MK3S+
 
| Network Address = http://192.168.0.175:5000
 
| Network Address = http://192.168.0.175:5000
| WebInterace = Octoprint
+
| WebInterface = Octoprint
 
| Nozzle Size (mm) = 0.4
 
| Nozzle Size (mm) = 0.4
 
| Nozzle Type = Hardened Steel
 
| Nozzle Type = Hardened Steel

Revision as of 03:14, 28 June 2022

ClassWarningIcon.png Members must complete the 3D Printing Class before using this tool



Prusa MK3S.jpg


Asmbly has purchased two new Prusa MK3S+ 3D Printers. As of now, these are the recommended 3D printers for new users and will be covered in the Intro to 3D Printing class.

ASMBLY Prusa i3 MK3S+ Printers
Apollo
Status Active
Manufacturer Prusa
Model i3 MK3S+
Nozzle Size 0.4mm
Nozzle Type Hardened Steel
Nozzle Count 1
Filament Size 1.75mm
Print Volume 250 x 210 x 210mm
Max Bed Temperature 110C
Max Nozzle Temperature 305C
Max Print Speed 100mm/s
Extruder Type Direct
Manual Unknown
Control Interface Octoprint
Network Address http://192.168.0.175:5001


Hermes
Status Active
Manufacturer Prusa
Model i3 MK3S+
Nozzle Size 0.4mm
Nozzle Type Hardened Steel
Nozzle Count 1
Filament Size 1.75mm
Print Volume 250 x 210 x 210mm
Max Bed Temperature 110C
Max Nozzle Temperature 305C
Max Print Speed 100mm/s
Extruder Type Direct
Manual Unknown
Control Interface Octoprint
Network Address http://192.168.0.175:5000


Resources


Maintenance

This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.