Difference between revisions of "Prusa MK3S+"

From Asmbly Wiki
Line 3: Line 3:
  
 
Asmbly has purchased two new Prusa i3 MK3S+ 3D Printers.  As of now, these are the recommended 3D printers for new users and will be covered in the Intro to 3D Printing class. Both printers live in the left half of the printing enclosure. The one on the left is named Apollo, and the one on the right is named Hermes.  
 
Asmbly has purchased two new Prusa i3 MK3S+ 3D Printers.  As of now, these are the recommended 3D printers for new users and will be covered in the Intro to 3D Printing class. Both printers live in the left half of the printing enclosure. The one on the left is named Apollo, and the one on the right is named Hermes.  
 +
 +
The printers are controllable over Octoprint, which you can use the web browser or an app to connect to while on the ASMBLY network. You cannot access these machines from home. Tasks such as preheating and filament changes can be done via the built-in panel on the front bottom of the printer.
  
 
{|class="wikitable" width="100%" style="text-align: center; margin: auto"
 
{|class="wikitable" width="100%" style="text-align: center; margin: auto"

Revision as of 03:31, 28 June 2022

ClassWarningIcon.png Members must complete the 3D Printing Class before using this tool



Prusa MK3S.jpg


Asmbly has purchased two new Prusa i3 MK3S+ 3D Printers. As of now, these are the recommended 3D printers for new users and will be covered in the Intro to 3D Printing class. Both printers live in the left half of the printing enclosure. The one on the left is named Apollo, and the one on the right is named Hermes.

The printers are controllable over Octoprint, which you can use the web browser or an app to connect to while on the ASMBLY network. You cannot access these machines from home. Tasks such as preheating and filament changes can be done via the built-in panel on the front bottom of the printer.

ASMBLY Prusa i3 MK3S+ Printers
Apollo
Status Active
Manufacturer Prusa
Model i3 MK3S+
Nozzle Size 0.4mm
Nozzle Type Hardened Steel
Nozzle Count 1
Filament Size 1.75mm
Print Volume 250 x 210 x 210mm
Max Bed Temperature 122C
Max Nozzle Temperature 295C
Max Print Speed 100mm/s
Extruder Type Direct
Manual Unknown
Control Interface Octoprint, Device Screen & Buttons
Network Address http://192.168.0.175:5001


Hermes
Status Active
Manufacturer Prusa
Model i3 MK3S+
Nozzle Size 0.4mm
Nozzle Type Hardened Steel
Nozzle Count 1
Filament Size 1.75mm
Print Volume 250 x 210 x 210mm
Max Bed Temperature 122C
Max Nozzle Temperature 295C
Max Print Speed 100mm/s
Extruder Type Direct
Manual Unknown
Control Interface Octoprint, Device Screen & Buttons
Network Address http://192.168.0.175:5000


Resources


Maintenance

This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.