Prusa MK3S+

From Asmbly Wiki

ClassWarningIcon.png Members must complete the 3D Printing Class before using this tool



Prusa MK3S.jpg


Asmbly has purchased two new Prusa MK3S+ 3D Printers. As of now, these are the recommended 3D printers for new users and will be covered in the Intro to 3D Printing class.

ASMBLY Prusa i3 MK3S+ Printers
Apollo
Status Active
Manufacturer Prusa
Model i3 MK3S+
Nozzle Size 0.4mm
Nozzle Type Hardened Steel
Nozzle Count 1
Filament Size 1.75mm
Print Volume 250 x 210 x 210mm
Max Bed Temperature 110C
Max Nozzle Temperature 305C
Max Print Speed 100mm/s
Extruder Type Direct
Manual Unknown
Control Interface Unknown
Network Address http://192.168.0.175:5001


Hermes
Status Active
Manufacturer Prusa
Model i3 MK3S+
Nozzle Size 0.4mm
Nozzle Type Hardened Steel
Nozzle Count 1
Filament Size 1.75mm
Print Volume 250 x 210 x 210mm
Max Bed Temperature 110C
Max Nozzle Temperature 305C
Max Print Speed 100mm/s
Extruder Type Direct
Manual Unknown
Control Interface Unknown
Network Address http://192.168.0.175:5000


Resources


Maintenance

This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.