Difference between revisions of "QIDI X-Max"

From Asmbly Wiki
(Created page with "The QIDI X-Max is an enclosed single-extruder 3D Printer with a build envelope of 11.8''x9.8''x11.8''. {{Required|3D Printing}} {{ToolPhoto|QIDI_X-Max.jpg}} {{Owned}} Ca...")
 
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
The QIDI X-Max is an enclosed single-extruder 3D Printer with a build envelope of 11.8''x9.8''x11.8''.
+
{{Boneyard}}
  
{{Required|3D Printing}}
+
The QIDI X-Max is an enclosed single-extruder 3D Printer with a high range of materials it can print. It lives to the side of the printer cabinet
  
 
{{ToolPhoto|QIDI_X-Max.jpg}}
 
{{ToolPhoto|QIDI_X-Max.jpg}}
  
{{Owned}}
+
 
[[Category:3D Printers]]
+
{{Infobox 3d printer
 +
| Printer Name = Unknown Name (QIDI X-Max)
 +
| Status = {{PrinterRemoved}}
 +
| Manufacturer = QIDI
 +
| Model = X-MAX
 +
| Network Address = Unknown
 +
| Nozzle Size (mm) = 0.4
 +
| Nozzle Type = Brass(?)
 +
| Nozzle Count = 1
 +
| Filament Size (mm) = 1.75
 +
| Print Volume (mm) = 300 x 250 x 300
 +
| Max Bed Temperature (C) = 100
 +
| Max Nozzle Temperature (C) = 300
 +
| Max Print Speed (mm/s) = 100
 +
| Extruder Type = Direct
 +
}}
 +
 
 +
== Resources ==
 +
* [http://www.qd3dprinter.com/products/x-max/ Product Page]

Latest revision as of 03:52, 28 June 2022


This tool is no longer at Asmbly Makerspace


The following information is maintained for historical purposes only. Currently operable tools are listed in the Master Tools List




The QIDI X-Max is an enclosed single-extruder 3D Printer with a high range of materials it can print. It lives to the side of the printer cabinet


QIDI X-Max.jpg



Unknown Name (QIDI X-Max)
Status Retired
Manufacturer QIDI
Model X-MAX
Nozzle Size 0.4mm
Nozzle Type Brass(?)
Nozzle Count 1
Filament Size 1.75mm
Print Volume 300 x 250 x 300mm
Max Bed Temperature 100C
Max Nozzle Temperature 300C
Max Print Speed 100mm/s
Extruder Type Direct
Manual Unknown
Control Interface Unknown
Network Address Unknown



Resources