QIDI X-Max
From Asmbly Wiki
Revision as of 03:52, 28 June 2022 by Pearlgreymusic (talk | contribs)
This tool is no longer at Asmbly Makerspace
The following information is maintained for historical purposes only. Currently operable tools are listed in the Master Tools List
The QIDI X-Max is an enclosed single-extruder 3D Printer with a high range of materials it can print. It lives to the side of the printer cabinet
| Status | Retired |
| Manufacturer | QIDI |
| Model | X-MAX |
| Nozzle Size | 0.4mm |
| Nozzle Type | Brass(?) |
| Nozzle Count | 1 |
| Filament Size | 1.75mm |
| Print Volume | 300 x 250 x 300mm |
| Max Bed Temperature | 100C |
| Max Nozzle Temperature | 300C |
| Max Print Speed | 100mm/s |
| Extruder Type | Direct |
| Manual | Unknown |
| Control Interface | Unknown |
| Network Address | Unknown |
