Difference between revisions of "CR-10S"
From Asmbly Wiki
| Line 11: | Line 11: | ||
| Manufacturer = Creality | | Manufacturer = Creality | ||
| Model = CR-10S | | Model = CR-10S | ||
| − | | Network Address = | + | | Network Address = http://192.168.0.175:5002 |
| Nozzle Size (mm) = 0.4 | | Nozzle Size (mm) = 0.4 | ||
| Nozzle Type = Brass(?) | | Nozzle Type = Brass(?) | ||
Revision as of 03:07, 28 June 2022
Members must complete the 3D Printing Class before using this tool
The Creality CR-10S is a 3D printer at the space. Because it has a Bowden extruder setup, it is NOT recommended to use flexible filaments (such as TPU) with the CR-10. This CR-10S is modified, so it may have specifications different from the stock specifications outlined in the manual. List of known modifications TBA.
| Status | Active |
| Manufacturer | Creality |
| Model | CR-10S |
| Nozzle Size | 0.4mm |
| Nozzle Type | Brass(?) |
| Nozzle Count | 1 |
| Filament Size | 1.75mm |
| Print Volume | 300 x 300 x 400mm |
| Max Bed Temperature | 90(?)C |
| Max Nozzle Temperature | 230(?)C |
| Max Print Speed | 60(?)mm/s |
| Extruder Type | Bowden |
| Manual | Unknown |
| Control Interface | Unknown |
| Network Address | http://192.168.0.175:5002 |
Resources
Maintenance
This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.
