Difference between revisions of "PolyPrinter 229 Overhaul"
From Asmbly Wiki
(Updated Materials Page) |
|||
| Line 30: | Line 30: | ||
<PPE> are required to use this tool. | <PPE> are required to use this tool. | ||
| − | ==== Etiquette | + | ==== Etiquette ==== |
| − | + | The 3D printers do not have a daily limit on booking time, but the time spent with the printers should include not only the print time, but also the additional time needed for pre-print and post-print tasks. Please incorporate this extra time when booking the printers. | |
| − | + | ==Use Case== | |
| − | |||
| − | == Use Case | ||
Description of what the tool does and when or why to use it | Description of what the tool does and when or why to use it | ||
Asmbly use: e.g. Skedda required, or part of an area. | Asmbly use: e.g. Skedda required, or part of an area. | ||
| − | == Materials == | + | ==Materials== |
| − | + | Members are encouraged to bring their own filament for 3D printing projects. However, for your convenience, a limited supply of free filament is available for use with the Makerspace 3D printers. This filament can be found on the table next to the printers, as well as in the storage area beneath them. Please note that the free filament is intended for community use, so availability may vary. | |
| − | |||
| − | + | ==== Material Properties, Configuration, and Vendors==== | |
| + | To be added as a separate wiki page. | ||
| − | + | ==Operation (pictures encouraged)== | |
| − | ==== | + | ====Feeds and Speeds - if appropriate==== |
| − | |||
| − | ==== | + | ==== Controls==== |
| − | |||
| − | + | ====Settings and Adjustments==== | |
| − | + | ====Tool Use==== | |
| − | + | ==Cleanup== | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | == Cleanup == | ||
{{UniversalCleaning}} | {{UniversalCleaning}} | ||
| − | ==== Tool Specific Cleaning Guide ==== | + | ====Tool Specific Cleaning Guide==== |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | *What to clean | |
| − | + | *How to clean | |
| − | + | *Where to dispose of waste | |
| − | |||
| − | |||
| − | == Resources == | + | ==Resources== |
| − | ==== Manual ==== | + | ====Manual==== |
| + | [[Media:PolyPrinter 229 User Manual.pdf|PolyPrinter]] | ||
| − | ==== Discourse Links ==== | + | ==== Discourse Links==== |
| + | [https://yo.asmbly.org/c/spaces/3dprinters/11 3D Printers Space Team] | ||
| − | ==== SIG Information (if relevant) ==== | + | ====SIG Information (if relevant)==== |
| − | ==== External Resources ==== | + | ====External Resources==== |
| − | == Troubleshooting == | + | ==Troubleshooting== |
| − | ==== Common Problems ==== | + | ====Common Problems==== |
Detail what the problem is and how to fix it | Detail what the problem is and how to fix it | ||
If you are unsure, it is always best to contact a steward and fill out a [https://docs.google.com/forms/d/e/1FAIpQLSfBhIcxwJPpBbuTVlxZ6-hSfNduEM5kkT0e4JP_uxGe9Ar75Q/viewform problem report] | If you are unsure, it is always best to contact a steward and fill out a [https://docs.google.com/forms/d/e/1FAIpQLSfBhIcxwJPpBbuTVlxZ6-hSfNduEM5kkT0e4JP_uxGe9Ar75Q/viewform problem report] | ||
| − | == Common Projects == | + | ==Common Projects== |
| − | == Critical Info! == | + | ==Critical Info! == |
| − | * Do NOT use metal tools on the Bed | + | *Do NOT use metal tools on the Bed |
* Avoid touching the plate with your fingers. Skin oil can affect performances. | * Avoid touching the plate with your fingers. Skin oil can affect performances. | ||
| − | * Requires use of [https://www.kisslicer.com/ KISSlicer] | + | *Requires use of [https://www.kisslicer.com/ KISSlicer] |
| − | * Only use Polyprinter brand filament reels | + | *Only use Polyprinter brand filament reels |
| − | == Resources== | + | ==Resources== |
| − | * [[Media: | + | *[[Media:PolyPrinter 229 User Manual.pdf|User Manual]] |
{{Owned}} | {{Owned}} | ||
[[Category:3D Printing]] | [[Category:3D Printing]] | ||
Revision as of 03:38, 6 September 2024
Members must complete the Intro to Filament 3D Printing Class before using this tool
The Polyprinter 229 is fast, reliable and straightforward to use. We usually leave it set up for ABS printing.
| Status | Active |
| Manufacturer | Polyprinter |
| Model | 229 |
| Nozzle Size | 0.4mm |
| Nozzle Type | Brass(?) |
| Nozzle Count | 1 |
| Filament Size | 1.75mm |
| Print Volume | 229 x 229 x 229mm |
| Max Bed Temperature | 125(?)C |
| Max Nozzle Temperature | 300(?)C |
| Max Print Speed | 250(?)mm/s |
| Extruder Type | Direct |
| Manual | Unknown |
| Control Interface | Unknown |
| Network Address | Unknown |
Safety
Universal Safety
- Be aware of your surroundings, especially when handling large materials.
- Do not approach anyone operating equipment. Stand patiently in their field of view.
- Use PPE, including filtration and eye protection, when handling dust or emptying dust/shaving containers.
Equipment-Specific Safety
<CLASS> is required to use this tool.
<PPE> are required to use this tool.
Etiquette
The 3D printers do not have a daily limit on booking time, but the time spent with the printers should include not only the print time, but also the additional time needed for pre-print and post-print tasks. Please incorporate this extra time when booking the printers.
Use Case
Description of what the tool does and when or why to use it
Asmbly use: e.g. Skedda required, or part of an area.
Materials
Members are encouraged to bring their own filament for 3D printing projects. However, for your convenience, a limited supply of free filament is available for use with the Makerspace 3D printers. This filament can be found on the table next to the printers, as well as in the storage area beneath them. Please note that the free filament is intended for community use, so availability may vary.
Material Properties, Configuration, and Vendors
To be added as a separate wiki page.
Operation (pictures encouraged)
Feeds and Speeds - if appropriate
Controls
Settings and Adjustments
Tool Use
Cleanup
Universal Cleaning Guide
- Return the equipment to neutral.
- Sweep up any dust and debris around the tool, your table top, and the floor - both in the equipment area and your work area.
- Clear the floor of any tripping hazards, like power cords.
- Empty trash cans and dust collectors that are halfway full or more into the Asmbly dumpster behind the workshop.
- Leave the shop 110% better than you found it.
Tool Specific Cleaning Guide
- What to clean
- How to clean
- Where to dispose of waste
Resources
Manual
Discourse Links
SIG Information (if relevant)
External Resources
Troubleshooting
Common Problems
Detail what the problem is and how to fix it
If you are unsure, it is always best to contact a steward and fill out a problem report
Common Projects
Critical Info!
- Do NOT use metal tools on the Bed
- Avoid touching the plate with your fingers. Skin oil can affect performances.
- Requires use of KISSlicer
- Only use Polyprinter brand filament reels
Resources
Maintenance
This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.
