Grizzly G0779 Gearhead Drill Press

The Grizzly G0779 is a 2hp gearhead drill press with a 23-3/8" swing and a 6-speed reversible spindle. Speeds range from 90rpm to 1970rpm. It's equipped with a recirculating coolant system and a Palmgren cross-slide vise.

Members must complete the Metal Shop Safety Class before using this tool

Usage Notes

• Only change gears when the spindle is stopped
• If a knob doesn't want to go into gear, try turning the spindle 1/4-1/2 turn. The gears should mesh nicely.
• If the motor's on and the spindle isn't turning, one of the knobs is between gears.

Resources

• User Manual
• Specification Sheet
• Parts List
• Coolant System Manual
• Coolant System Parts List

Maintenance

This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.