Precision Matthews CS-350 Cold Saw

From Asmbly Wiki
Revision as of 05:47, 13 October 2023 by Jon (talk | contribs)

Asmbly has purchased a Precision Matthews CS-350 3hp, 14" cold saw. This saw is used to make precision, repeatable cross and miter cuts in metal bar stock.

  • Variable blade speed for the best cutting speed to match the job from 24-120 RPM
  • Quick Acting lever for angle changes, can be done in only a few seconds
  • This saw has a 90 degree swivel head, for slotting capability
  • Quick Acting vise lever, for faster operation on multiple cuts of the same size
  • Miters 45 degrees, both ways (Left and Right)
  • Adjustable Work Stop with Inch/MM Readings included as standard equipment, for faster repetitive cuts
  • Recirculating Coolant System is standard equipment


ClassWarningIcon.png Members must complete the Metal Shop Safety Class before using this tool



CS-350.jpg


Cutting Capacities

Angle Bar Round Tube Square Tube Rectangular Tube
3.5" 4.7" 4"x4" 6.3"x3.5"
45º 3" 4" 4.5"x4.5" 3.5"x2.8"

Resources


Maintenance

This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.