Prusa MK3S+

Members must complete the Intro to Filament 3D Printing Class before using this tool

Asmbly has three Prusa i3 MK3S+ 3D Printers. As of now, these are the recommended 3D printers for new users and will be covered in the Intro to 3D Printing class. These printers live to the left in the printing enclosure. The one on the left is named Apollo, and the middle is named Hermes, and the rightmost is Sunwukong.

The printers are controllable over Octoprint, which you can use the web browser or an app to connect to while on the ASMBLY network. You cannot access these machines from home. Tasks such as preheating and filament changes can be done via the built-in panel on the front bottom of the printer.

ASMBLY Prusa i3 MK3S+ Printers

Apollo Status Active Manufacturer Prusa Model i3 MK3S+ Nozzle Size 0.4mm Nozzle Type Hardened Steel Nozzle Count 1 Filament Size 1.75mm Print Volume 250 x 210 x 210mm Max Bed Temperature 122C Max Nozzle Temperature 295C Max Print Speed 100mm/s Extruder Type Direct Manual Unknown Control Interface Octoprint, Device Screen & Buttons Network Address http://apollo-printer.local/

Hermes Status Active Manufacturer Prusa Model i3 MK3S+ Nozzle Size 0.4mm Nozzle Type Hardened Steel Nozzle Count 1 Filament Size 1.75mm Print Volume 250 x 210 x 210mm Max Bed Temperature 122C Max Nozzle Temperature 295C Max Print Speed 100mm/s Extruder Type Direct Manual Unknown Control Interface Octoprint, Device Screen & Buttons Network Address http://hermes-printer.local/

Sunwukong Status Active Manufacturer Prusa Model i3 MK3S+ Nozzle Size 0.4mm Nozzle Type Hardened Steel Nozzle Count 1 Filament Size 1.75mm Print Volume 250 x 210 x 210mm Max Bed Temperature 122C Max Nozzle Temperature 295C Max Print Speed 100mm/s Extruder Type Direct Manual Unknown Control Interface Octoprint, Device Screen & Buttons Network Address http://sunwukong-printer.local/

Resources

• User Manual

Maintenance

This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.