Search results
From Asmbly Wiki
- * Spindle Speed: 1,725 RPM * Chisels: 1/4", 5/16", 3/8", and 1/2612 bytes (69 words) - 17:15, 8 March 2022
- ...t/min), a 13-inch resaw capacity and a 1-1/2 HP 110/220V motor. It accepts 1/8-inch to 3/4-inch blade width. Changeout is easy with a hinged blade guard * Large 16-by-21-1/2-inch work table679 bytes (104 words) - 21:38, 21 August 2023
- ...s and 50" in two passes. Maximum material thickness is 2-1/4"; minimum is 1/32"363 bytes (48 words) - 15:02, 13 September 2023
- ...takes 4½"-tall sanding sleeves in the following diameters: 1/2", 3/4", 1", 1½", 2", 3"457 bytes (50 words) - 21:21, 24 March 2023
- * Mild Steel 24 ga. - 1/4 in. (TIG) * Aluminum 24 ga. - 1/4 in. (TIG)535 bytes (74 words) - 01:20, 17 September 2023
- ...er the basics of bending metal, covering the pipe & tubing bender and 3-in-1 sheet metal machine.186 bytes (27 words) - 03:21, 7 January 2023
- You must purchase and bring 1-2 spools of 1.75mm pla flilament with you to the in person portion of the class. These ru == Part 1 ==1 KB (217 words) - 03:14, 7 January 2023
- Access: starting September 1, 2021, access is via OpenPath. More details can be found [https://yo.asmbly270 bytes (35 words) - 22:32, 1 August 2021
- The Tormach class is taught 1:1 on request by [mailto:epeterson2733@gmail.com Eric Peterson ]940 bytes (143 words) - 02:53, 5 October 2021
- *If a knob doesn't want to go into gear, try turning the spindle 1/4-1/2 turn. The gears should mesh nicely.837 bytes (129 words) - 14:58, 29 August 2022
- Use the GCB-1 curing box for Mars prints. {{ToolPhoto|GCB-1.jpg}}216 bytes (33 words) - 03:29, 7 January 2023
- ...le tops 1/16" or 3/32" diameter tungsten rod. Get ER70S- steel fill rod in 1/16" size.792 bytes (128 words) - 02:39, 5 October 2021
- * 4.76 mm (0.19") baltic birch: 1.2 mm "burn" (kerf) at 25/75 (Dorian), 30%/100% (Tarkin) | 1 2 3 1 2 3 1 2 |4 KB (662 words) - 02:20, 18 May 2023
- ...6" x 108" belt driven by a 3hp motor with electronically-variable speed. 1- 2- or 3-inch oscillating drums may be used with an auxiliary table.398 bytes (54 words) - 14:50, 13 September 2023
- [[File:DeWalt compact router with track saw guide.jpg|thumb]]<big>Router with 1/2" collet only.</big>321 bytes (49 words) - 04:20, 14 March 2024
- ...F45 has recommended capacities in mild steel of 3/4" for end milling and 1-1/2" for drilling.1 KB (157 words) - 15:28, 8 February 2023
- * a Black and Decker BDEMS600 type 1 detail sander394 bytes (58 words) - 16:23, 15 March 2023
- * a Ridgid r7122 1/2" corded drill326 bytes (48 words) - 01:55, 29 May 2022
- ...miliar to users of the CO2 lasers, but with the ability to cut steel up to 1/4" thick.533 bytes (87 words) - 20:18, 16 September 2023
- ** Thermaltronics SHP-1 standard handpiece with yellow-band (375ºC) tips605 bytes (78 words) - 01:03, 19 March 2023